Indirect - fortic f10
A BS 3198 Double Feed Indirect (DF) Combination Cylinder.
| Dimensions in mm |
|
|
|
|
|
|
litres |
| Nominal |
Height |
Diameter |
A |
B |
C |
D |
Hot |
Cold |
| |
|
|
|
|
|
|
|
1050 |
450 |
610 |
300 |
450 |
420 |
85 |
20 |
1225 |
450 |
790 |
370 |
630 |
420 |
115 |
20 |
1325 |
450 |
890 |
440 |
730 |
420 |
130 |
20 |
1425 |
450 |
985 |
440 |
900 |
425 |
140 |
20 |
1875 |
450 |
1435 |
520 |
1350 |
425 |
206 |
20 |
*refers to each cold cistern.
Drain boss centre above base 100mm
A self - contained double feed indirect
pattern with coil heat exchanger.
The cold section comprises two
independent feed/expansion cisterns.
Primary feed and vent pipes are not
included but should be sited to suit
the pump design requirements of
individual heating systems.
Fortic F10 units can be used with
primary system inhibitors.
Insulation
Fortic F10 has a single thickness of
C.F.C free urethane foam lagging
as standard, this adds approximately
50mm to the cylinder diameter.
Fortic F10 is available with a double
thickness of C.F.C free urethane foam
lagging on request, this gives lower
heat loss and will add approximately
100mm to the cylinder diameter.
|
